still having fits with this stuff. it is hard as heck to sand and when it does it leaves scratches that are a pain. my question is this, as with alum, brass, bronze i sand at 90 degree angles each pass and it works, this s.s. does not seem to matter. it still shows scratches. what is the better way to sand. cross pattern or straight line each pass. also has anyone used the specialty compounds for s.s. and what was the result. also i like the vented wheels for the other metals i have done but should i be using spiral sewn these plates and trim? thanks as always for the help.
cliff
__________________
when in doubt polish it out/ why replace it when you can refinish it
G2 Polishing and Powdercoating
|