Thread: Wheel out of balance
View Single Post
  #3 (permalink)  
Old 06-10-2005, 05:04 PM
Trixxr Trixxr is offline
Newbie
  
Join Date: May 2005
Location: Nor*Cal
Posts: 9
Trixxr
Send a message via ICQ to Trixxr Send a message via AIM to Trixxr Send a message via MSN to Trixxr Send a message via Yahoo to Trixxr
Default
It's a 3/4" shaft and the hole is 3/4" with no bushings or sleeves. There isn't much of any slop between wheel and shaft. and you can not move the wheel on the shaft by moving one way or another (up & down). Maybe just a bad wheel ?
__________________
3/4 HP W-3/4"x 2-5/16" shafts @ 3450 RPMs
Running 8" wheels, putting down the shine..
Reply With Quote