Re: Gun Barrel question
yes it matters. i have done a few single shot .22 calibers bolt actions in flat black with good results. the only thing to worry about it powder buildup on moving parts. it can cause a jam and possible a catastrophic failure. i would not recommend doing it on anything but exterior surfaces on any gun(not in the action area). also if you have to do any disassembly to powder them i would not do it. if you are not a licensed gunsmith you are asking for a ton of liability.
__________________
when in doubt polish it out/ why replace it when you can refinish it
G2 Polishing and Powdercoating
|