Quote:
|
Originally Posted by sigibbons
You cured a motorcycle frame on a BBQ  |
A small bicycle frame. BMX type of bike.
I bent up some 1/4 threaded rod to make a stand that stuck through the fork tube, seat post, and crank case, and blasted it with powder. I lined the BBQ (propane) with tin foil and poked a few pin holes through it and pre-heated it.
The frame came out great, except that I missed a few nooks and crannies with the powder. Also, it was difficult to maintain a temperature. It was constantly climbing or dropping and I could never dial it in.