View Single Post
  #12 (permalink)  
Old 05-13-2006, 05:29 PM
mtnbiker mtnbiker is offline
Amateur Metal Finisher
 
Join Date: Mar 2005
Posts: 202
mtnbiker is an unknown quantity at this point
Default Re: Idea for masking off areas

Quote:
Originally Posted by hvac36
Cruizer,
Here is the secrete to taping. Mask your area, powder pre-bake just until the powder starts to melt then remove from oven let cool so you can remove the tape. Place back in oven for full cure..
This will remove all those rough edges..

Jim S...
I have yet to try this... but I will give it a shot testing one of these days.

Seems like the only way to do it to me.
Reply With Quote