View Single Post
  #7 (permalink)  
Old 10-19-2006, 01:37 PM
seanc seanc is offline
Zinc Plating Guru
 
Join Date: Jun 2003
Posts: 321
seanc is on a distinguished road
Default Re: copy cad power problems....I think??????

Neil:
Quote:
Is there a faster/better way to heat up the bath than with the aquarium heater? Like could this be done in a large crock pot or roaster?
I don't know for sure, but I would not use anything but the compatible plastics. Being an acid, it may react adversely w/ceramics.

Quote:
I had my heater in my small 2 gal bucket (insulated) for 5 hours and it went up from 60 to 64 degrees.
You've either got a defective heater, or too little wattage.

I use a 200w aquarium heater, and it will bring 3 gallons (uninsulated) from 60 to 100º in about an hour.

Sean
__________________
Seans Zinc Plating page
Reply With Quote