Hello everyone
After spending about a month reading almost every oven building thread on this forum I decided to go ahead and build myself a larger oven so that I can PC my rearend and any other larger parts that I come across. I'm sure you all know already, but this is an amazingly helpful forum and I thank everyone who has posted both questions and answers. Well I guess that's enough babble so here we go.
My frame is 2x2 11ga. mild steel with 1x2 11ga. supports. The insulation on the top and bottom is kaowool that I had left over from my forge. The sides, back, and door are a combination of mineral wool board and insulation from 2 donor ovens. Here are a couple pics of the frame , interior skin, elements, and divider track.
Later
