"* Ni-Cd/hydrogen : 1.2V~16.8V (1~14CELL)
* lithium-polymer/lithium-ion : 3.7V~18.5V (1~5CELL)
* Lead cell : 2.0V~12.0 (1~6CELL)
* Charge current 0.1A - 5A ( selecting 100mA steps charge current) "
The votage probobly depends on wich type of cells im charging. But it seems to reach highest voltage when charging li-po cells.
The things I will anodize are mostly smaller billet parts, but some cast parts may occur. In the long run I will definetly get a real CC powersource with more amps but they cost about $ 300 in sweden so Im looking for cheaper alternatives.
These on the pic will be done but in a more orange colour like the one with the KTM logo.(I havent anodized these, they were made by a pro)
