Thread: Powder coating something zine plated?
View Single Post
  #2 (permalink)  
Old 03-04-2007, 06:27 PM
jtagger19 jtagger19 is offline
Experienced Metal Finisher
  
Join Date: Apr 2004
Posts: 466
jtagger19 is on a distinguished road
Default Re: Powder coating something zine plated?
it should be blasted
but if you are in a run sand it with 80-120 grit and it will be good to go.
it would still need to be cleaned.
i did it with some VW parts and never had any problems with them .
Reply With Quote