Thread: Nickel Plating Problems After Flash Copper
View Single Post
  #7 (permalink)  
Old 08-16-2007, 11:23 AM
SLOSteve SLOSteve is offline
Newbie
  
Join Date: May 2007
Posts: 33
SLOSteve is an unknown quantity at this point
Default Re: Nickel Plating Problems After Flash Copper
Hey Mark,

I'm trying to attach a picture of the bezel but for some reason it won't upload.

Okay...I'm sanding the bezel with 600 (figuring that will take the black off faster) then go to 800 to take care of the scratch marks. The "roughness" of the flash copper is coming off just fine but there are more pronounced black spots where I sand. This is making me nuts. Is this going to come off in the acid etch or no?
Last edited by SLOSteve; 08-16-2007 at 12:22 PM.
Reply With Quote