Thread: Nickel Plating Problems After Flash Copper
View Single Post
  #12 (permalink)  
Old 08-17-2007, 09:23 AM
SLOSteve SLOSteve is offline
Newbie
  
Join Date: May 2007
Posts: 33
SLOSteve is an unknown quantity at this point
Default Re: Nickel Plating Problems After Flash Copper
Hey Mark,

Okay, one last rundown before I dive in here......

Sandblast, degrease, fill pits (where necessary). Sand, degrease, activate, rinse and flash copper. Sand, degrease, activate, rinse then into nickel bath.
Reply With Quote