Oops my fault
I was looking at this one
http://auberins.com/index.php?main_p...d3ce7debf2fb4c
but i also found this one by delta. They had a few different types in the 1/16 din controller but i didn’t really know what specifically i needed to have.
http://www.factorymation.com/s.nl/sc.2/category.2/.f
The biggest thing ive seen people say to make sure is correct when choosing a PIC is that the amp and ma output is high enough to drive the SSR/SSR's
The differences im seeing between the pids though is whether its DC current, pulse voltage, or linear voltage. Im just not sure what the difference is and what I would need.
Sorry for all the electrical questions but im more of a wrench turner than an electrician