I have built a new curing oven. I built it out of mainly junk from the scrap yard and a free double oven I scrounged off of craigslist for free. My oven ID is 36x24x72. I made it big enough to use on motorcycle frames. I have pics attached. It ain't pretty but I am hoping it will do the job. My question is this can I rework the wiring on the elements so that the upper oven switch when set to bake will run 2 elements and the lower will also run the other 2. Will this overload it in any way? I used the same basic design as outlined at
http://www.powdercoatoven.4t.com/ Any help you can lend is appreciated.
hoghollor@aol.com