Thread: Carwiz, got a minute?
View Single Post
  #2 (permalink)  
Old 08-07-2008, 11:15 AM
ed_denu ed_denu is offline
Experienced Metal Finisher
  
Join Date: Jul 2006
Posts: 273
ed_denu is on a distinguished road
Default Re: Carwiz, got a minute?
Not carwiz, but the setup is pretty straight forward. Change PID parameter 'outy' to '1' and then use the J2 jumpers to control the contactor. Run a hot feed to PID terminal 13 and connect the 14 terminal to the A2 terminal of the contactor(A1 gets a neutral).
Last edited by ed_denu; 08-07-2008 at 11:32 AM.
Reply With Quote