A few months back ED sent me a wire schematic for the oven including a fan, light, PID, Buzzer and timer. I have it all wired up and everything is working great but one thing. when I turn on the timer the oven fires and burners get hot. The 8 Pin Relay stays open and buzzes. I quickly turn the timer off and the relay buzzing stops. Now if I left the timer on the burners do get hot but I obviously would have a burnt out relay. Any suggestions to what I have backwards? I checked and I think I have it all correct. I have the timer load 1 gong to the load splice and the Line 1 going to the relay #2. Whats keeping the relay form closing connection. A ground or something? I also haven't programmed the PID as I need to figure that out. Is that keeping something open until programmed? I have no idea how to program this PID (JLD612)
Any help is appreciated
Have a great 4th!
stevecjohnson@gmail.com
Steve