Yeah, I saw the pic. Unfortunately, it would be cost prohibitive to have the 2 or 3 steel parts I'm polishing sent out for clear powdercoat.
I'm going to have to try again with the VHT or some clear enamel.. I'm going to try a different tack with cleaning the part. I'm thinking the brake parts cleaner or the laquer thinner left something on the part. The VHT can says to use Acetone so I'm going to fully submerge the parts, let 'em sit for 20 mins or so then let 'em air dry all day and try again.
At this rate, it'll be October before I finish this friggin' 4 wheeler... hehe
|