Quote:
|
Originally Posted by skiddz
I have not yet tried greaseless on the mushroom buffs, but they appear stiff enough to accept the compound. I've got a full length frame skidplate to sand/polish and I was thinking about attacking it with a mushroom buff and greasless to smooth it up, but the more I look at it, the more I'm leaning towards just using my orbital sander up to 400, then a quick block sand with 600 wet. I'll finish it up on the buffer in the usual manner..
Pics of the axle didn't come out too good so I didn't post 'em. I've almost got the rear axle/bearing carrier reassembled (Just gota sand/polish the rear sprocket) so I'll get those pics put up this evening. The red sprocket and rotor hub set off the shiny axle pretty nicely.
|
Hey i got a full length skid for my banshee also and i attempted to polish it but man it took forever i mainly MX and it was a little bashed in =( hey give me a holla i show you my new race bike 2003 Arens/Laegers 265R
