Anybody need titanium?

[acidrain]

I came accross a killer deal on Titanium, but I had to buy WAY more than I needed.
I'm hoping to share some of the booty AT MY COST with you guys, otherwise I'll have to try to recoup' costs on ebay.
Giving you guys first grabs. I won't make a penny (you'll have to pay shipping).
1/16in type 1-2 in 3' lengths for $2 per piece (I'll cut if you want), or 1/8in type 2 in longer lengths for $3 per foot. I haven't lost a connection yet after going to Ti.
Here's some pics of how I did my shapes with the 1/16in:

[acidrain]

Here are a couple pics of 1/8in. PM me if you want some...

[destroyer125]

I will talk to you about the 1/8" rods, These and the 1/16" were just what I was planning on ordering

[acidrain]

You'll want to figure out EXACTLY what lengths you want, and I'll cut to spec for easier shipping.

[fragglerock]

hey acidrain, I tried to e-mail about the TI but it was sent back. I would like to purchase some of your TI. Please contact me with payment and purchase requrements.

[acidrain]

Seems that I've reached my limit of PM usage.
Try me at rameliza@hotmail.com
I have about 30 pieces of 1/16 left, but running out of 1/8 fast.
No worries though, if you guys need, I will be happy pick more up locally to fulfill your needs. Everybody should be using Ti. I can get the 1/8 individually in any legths up to 8ft, but the 1/16 is only available in 3ft. x 46pices (1lb).
Just tell me what lengths of each diameters you need, and I'll cut to length, box and ship Priority mail. I take paypal too.

[P8ntman4]

I am interested in purchasing some of both! I have tried to pm you and email you. thanks

[acidrain]

Sorry about that... just emptied my inbox.
I have a few of each sizes. PM me.

[acidrain]

I've had a couple more requests for the Ti rod. I'm thinking of picking more up (if you guys need). Let me know who need what sizes, and I'll make one more purchace.
Also, I came accross some Ti 10-32 machine screws and nuts. I picked up a small bag for $20. If anybody has a need for those, I can help you out with a few. Normal cost is in the $3-$4 ea. range. I can let them go for $1/nut with screw. They are counter-sunk hex drive. Nuts are crimped self-locking (aircraft hardware).
PM me. -Acid

[destroyer125]

I may need some more in the near future