Zincate - Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum

		Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Electroplating Questions
Zincate

Notices

Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!

We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, participate in blogs, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register?

You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.

Electroplating Questions Discussion Board For Electroplating and Electroless plating.

Thread Tools

Display Modes

#1 (permalink)

07-27-2003, 06:34 PM

neil

Newbie

Join Date: Apr 2002

Posts: 22

Zincate

Do I still have to zincate aluminum before plating with flash copper or can I just plate directly with flash copper?

#2 (permalink)

07-28-2003, 11:04 AM

mcaswell

Caswell Inc Founder

Join Date: Nov 2001

Location: Lyons, NY USA

Posts: 2,356

Blog Entries: 1

You still need to zincate.

__________________
--
Mike Caswell
Caswell Inc
http://www.caswellplating.com
Need Support? Visit our online support section at http://support.caswellplating.com
Have A Web Site?
Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Trackbacks are Off Pingbacks are Off Refbacks are Off

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
zincate on aluminum	Coltsaa	Electroplating Questions	3	02-14-2008 01:49 PM
Zincate Mikuni HSR42 carb and use zinc blackener	borgen	Electroplating Questions	1	01-18-2005 06:39 PM
Apply Zincate but flash copper wont stick	gevalia	Electroplating Questions	5	09-16-2003 06:09 PM
Strike copper or bright copper after zincate?	mdarr	Electroplating Questions	2	06-29-2003 02:23 PM
Zincate pre-treatment	plumcrazy	Other Metal Finishing Questions	1	12-13-2001 11:04 PM

All times are GMT -4. The time now is 02:46 AM.