|
|
|||||||
| Notices |
| Electroplating Questions Discussion Board For Electroplating and Electroless plating. |
 |
|
|
Thread Tools | Display Modes |
04-30-2004, 12:02 AM
|
|||
|
|||
Removing Electroless finish...
OK, so here is the story. I thought I was helping my dad out by applying a nice Electroless Krome finish to the metal parts of his muzzle loader (he had some trouble with it rusting in storage). Now I find out that anything other than "browned" metal parts is not "correct" for the time period that the gun comes from and he may lose points at competitions for being "out of dress" or something like that. (He's a Pennsylvania Mountain Man).
So, is there a way to get the Electroless off of the parts? I only did the flint lock and trigger assembly so it should be easy as the other parts are still unfinished. Thanks for the help. 
|
|
05-07-2004, 12:18 AM
|
||||
|
||||
|
Pickle #2 will strip nickel. Refer to the manual for makeup and use.
__________________
-- Mike Caswell Caswell Inc http://www.caswellplating.com Need Support? Visit our online support section at http://support.caswellplating.com Have A Web Site? Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Newbie, trying to find best way to finish aluminum-LONG POST | chik | Metal Polishing Questions | 6 | 03-14-2005 08:11 PM |
| can we identify this finish? | funkmunky | Electroplating Questions | 3 | 12-15-2004 08:45 PM |
| "high phosphorus" electroless nickel? | jkellymcc | Electroplating Questions | 0 | 08-26-2003 05:35 PM |
| Pot Metal Electroless Nickel - Suitability as finish | tgoode | Plating Pot Metal | 6 | 06-17-2003 07:01 PM |
| Removing old finish | Cleon Eck | Electroplating Questions | 1 | 12-27-2001 06:19 AM |
Linear Mode
