Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Electroplating Questions
pits in acid copper pits in acid copper
FlashChatBlogs FAQ Members List Calendar Search Today's Posts Mark Forums Read

Notices

Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!

We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, participate in blogs, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register?

You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.

Electroplating Questions Discussion Board For Electroplating and Electroless plating.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 04-03-2008, 07:57 AM
Newbie
  
Join Date: Mar 2008
Posts: 12
brhino1 is on a distinguished road
Default pits in acid copper
Morning guys last night we were plating with are acid copper here what happen buff out the parts a few pits not bad. Started the acid copper for 20 min parts was 2x2x5 long 6 amps took the part out and had more pits need help and we were bubbling.
Reply With Quote
  #2 (permalink)  
Old 04-03-2008, 08:43 AM
KCV6's Avatar
Amateur Metal Finisher
  
Join Date: Apr 2007
Location: Adelaide, Australia
Posts: 205
KCV6 is on a distinguished road
Default Re: pits in acid copper
Need a little bit more info on the part... is that 2 inches by 2 inches x 5 inches meaning about 48 inches surface area? what material is the part?

cheers Mark
Reply With Quote
  #3 (permalink)  
Old 04-03-2008, 10:46 AM
Newbie
  
Join Date: Mar 2008
Posts: 12
brhino1 is on a distinguished road
Default Re: pits in acid copper
Yes angle iron sanded and polished
Reply With Quote
  #4 (permalink)  
Old 04-04-2008, 01:22 PM
Newbie
  
Join Date: Mar 2008
Posts: 12
brhino1 is on a distinguished road
Default Re: pits in acid copper
Anyone there
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Acid copper not bond on flash copper help mgcobra Electroplating Questions 4 10-10-2007 08:51 AM
Acid copper Gabourie Electroplating Questions 3 09-25-2004 08:42 PM
filling small pits with acid copper danderson Electroplating Questions 2 08-25-2004 07:55 AM
Flash copper vs acid copper for PCB Holes cdaw Electroplating Questions 3 02-28-2004 09:47 PM
Strike Copper or Acid Copper over Nickel? mdarr Electroplating Questions 2 07-13-2003 01:53 AM


All times are GMT -4. The time now is 08:04 PM.

Contact Us - Caswell Inc. - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.