Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Metal Polishing Questions

Notices

Metal Polishing Questions Discussion Board For metal polishing questions.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 05-11-2004, 01:42 PM
Newbie
 
Join Date: May 2004
Posts: 2
chefwong
Default Zoop Seal - Does it really work as advertised

I'm interested in Zoop Seal. For those that have used the product, does it truly work as advertised and the longevity of the product is 2-3 YEARS ?

I'm a wax nut, and I currently either use Zaino or Klasse AIO/SG on polished aluminum pieces. I can easily say it last 9-12 months. Granted, I wax more often than that, but on the polished pieces durability is key after spending all that time polishing it to perfection....

I'd love to hear your feedback on the product !
Reply With Quote
  #2 (permalink)  
Old 05-11-2004, 05:49 PM
customandsound
Guest
 
Posts: n/a
Default

yes it work's and it last longer than that ..... caswell got to sizes of it ... give it a shot if you do alot of polishing
Reply With Quote
  #3 (permalink)  
Old 05-11-2004, 06:43 PM
Newbie
 
Join Date: May 2004
Posts: 2
chefwong
Default

The centers are brushed/clearcoated. The lip of the wheel is polished aluminum. I currently have Zaino on it.

I'm thinking about picking up some supplies from caswell's site to use to polish it with.


I currently use the following - Heavy Metal Polish followed up with Mother Billett Polish. Once it's perfect, I seal up the wheels with 2 coats of Klasse AIO and then 3 coats of Klasse SG. I'm not sure if you guys are familar with Heavy Metal Polish but it's replaced Flitz in my lineup of metal polishes.

Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Zinc plating on running seal surface? Broke Electroplating Questions 1 12-06-2004 02:52 PM
What is the best way to seal my part after polishing krsimulis Metal Polishing Questions 2 05-29-2004 10:03 PM
work area vs. cathode area elton10 Anodizing Questions 4 03-25-2004 10:59 PM
Zoop Seal etyrrany Metal Polishing Questions 2 10-04-2003 10:34 AM


All times are GMT -4. The time now is 05:34 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright © Caswell Inc.