Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Metal Polishing Questions
RPM\'S RPM\'S
FlashChatBlogs FAQ Members List Calendar Search Today's Posts Mark Forums Read

Notices

Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!

We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, participate in blogs, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register?

You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.

Metal Polishing Questions Discussion Board For metal polishing questions.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 09-24-2002, 11:46 PM
Amateur Metal Finisher
  
Join Date: Sep 2002
Posts: 51
fosgate99
Default RPM\'S
I was reading the polishing manual and i see that the speed you want to be at is 7200. How would the finish come out at 6000? What happens after 7200? Newbie. Thanks!!
Reply With Quote
  #2 (permalink)  
Old 09-25-2002, 10:40 AM
Amateur Metal Finisher
  
Join Date: Jan 2002
Posts: 80
saiyan7
Default Re: RPM\'S
you should be in good shape at 6000. The only difference is that the faster you go the more heat develops and the faster you can cut material form the surface. Too fast and it is possible to discolor your rim. I suppose that is why CASWELL suggests not to polish over 7200 rpm.
Reply With Quote
  #3 (permalink)  
Old 09-25-2002, 03:50 PM
Amateur Metal Finisher
  
Join Date: Sep 2002
Posts: 51
fosgate99
Default Re: RPM\'S
o ok cool!!
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
rpm's ? (sfpm) mercsvt Metal Polishing Questions 4 03-29-2002 01:24 PM


All times are GMT -4. The time now is 05:51 PM.

Contact Us - Caswell Inc. - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.