Thermocouple Clip Addition

[duke46]

They really make sure you have your powder done right. I have been using them for over a year now and hardley ever use the IR gun and don't have to open the oven.


Got to get some of these sold and out the door and at least it does not cost me to list on my own site but need to reach out to more places if any one has some good affordable ideas
More info on the site. I make them to suit your needs. And to swap between ovens.

http://www.pcitdad.com/Main.asp?pcid=47 ... =Galleries

[CarWiz]

Hey Duke! I'd recognize that face anywhere. How did you get unchained from the Metal Meet site?

Ken Kopsky - AKA: "CCWKen"

[duke46]

Hey Duke! I'd recognize that face anywhere. How did you get unchained from the Metal Meet site?

Ken Kopsky - AKA: "CCWKen"

When a you are a member of over 50 forums you forget where you are till its time for my birthday and then I get loaded down with the wishes.

[ed_denu]

50 forums! No wonder you're always complaining that you never get any work done.

[duke46]

I don't complain about getting it done I complain about people thinking you should be able to powder coat like going to wally world and buying a can of dag spray paint and they want you to do a 16" wheel for $20 and I tell them go buy some spray paint and do it your self over and over again and when the car wash takes it off come back and get it done right!

But as for as the forums when you need to see a picture or even just to look at some post on some forums you have to be a dag member.

Beside that I can do body work/fab work/auto AC work/ auto painting/auto restoration/electrical wiring and trouble shooting and CATV and telephone splicing and trouble shooting and powder so I sometimes need info and do what I have to do to get info. But powder is the easiest one for the quick turnaround if and when the economy gets back to a norm?