Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions > Oven Building Forum

Notices

Oven Building Forum Building A Curing Oven? - Here's the place to post your questions, specs and ideas.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 09-26-2005, 07:48 AM
Newbie
 
Join Date: Jun 2005
Location: Rowlett, TX
Posts: 41
LeeParsons
Send a message via ICQ to LeeParsons
Default Window for ovens

I'd like to put an observation window in my oven, anyone know a good place to get the glas.
__________________
Lee Parsons
Rowlett, TX (East Dallas)
Reply With Quote
  #2 (permalink)  
Old 09-26-2005, 10:41 AM
Amateur Metal Finisher
 
Join Date: Jun 2005
Posts: 51
crazy_mtb_2002
Default Re: Window for ovens

any glass shop should have high temp glass.
Reply With Quote
  #3 (permalink)  
Old 09-26-2005, 10:50 AM
mcaswell's Avatar
Caswell Inc Founder
 
Join Date: Nov 2001
Location: Lyons, NY USA
Posts: 2,360
mcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to behold
Default Re: Window for ovens

This sounds too simple, but what about the glass from a cooking oven door? There are plenty of chuck outs behind appliance stores.
__________________
--
Mike Caswell
Caswell Inc
http://www.caswellplating.com
Need Support? Visit our online support section at http://support.caswellplating.com
Have A Web Site?
Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm
Reply With Quote
  #4 (permalink)  
Old 09-26-2005, 01:13 PM
pickleboy's Avatar
Metal Finishing Guru
 
Join Date: Feb 2005
Location: belleville michigan
Posts: 635
pickleboy is just really nicepickleboy is just really nicepickleboy is just really nicepickleboy is just really nice
Default Re: Window for ovens

caswell is right because then you get the seal with it and dont have to try to make one.
__________________
when in doubt polish it out/ why replace it when you can refinish it
G2 Polishing and Powdercoating
Reply With Quote
  #5 (permalink)  
Old 11-27-2005, 07:56 AM
Amateur Metal Finisher
 
Join Date: Sep 2005
Posts: 52
coleman5 is on a distinguished road
Default Re: Window for ovens

i used one from a bbq grill biger than an oven glass.
Reply With Quote
  #6 (permalink)  
Old 11-28-2005, 06:28 PM
Newbie
 
Join Date: Nov 2005
Posts: 33
robsrod is on a distinguished road
Default Re: Window for ovens

I used the Glass from an old Oven I took the Thermostat out of. It works fine. There was a frame in the Oven that held in the Glass, I removed it and used High temp sealant and self starting screws for the Install.
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


All times are GMT -4. The time now is 06:53 AM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.