Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions > Oven Building Forum
newbie- need help... newbie- need help...
FlashChatBlogs FAQ Members List Calendar Search Today's Posts Mark Forums Read

Notices

Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!

We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, participate in blogs, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register?

You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.

Oven Building Forum Building A Curing Oven? - Here's the place to post your questions, specs and ideas.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 11-18-2005, 03:46 PM
Newbie
  
Join Date: Nov 2005
Posts: 1
oshkoshandbeyond is on a distinguished road
Default newbie- need help...
Hi everyone. I am considering building a 6'x6'x10' oven, and have a bunch of 1800 watt elements I would use. Does anyone know how many of these should be used (insulation properties will be excellent) to get it up to temp? Thanks for the help.
Tim
Reply With Quote
  #2 (permalink)  
Old 11-18-2005, 09:34 PM
Newbie
  
Join Date: Nov 2005
Posts: 33
robsrod is on a distinguished road
Default Re: newbie- need help...
I have 10 3000 watts elements in my 8x8x10. Takes about 10 minutes to reach 400 deg.
Reply With Quote
Reply

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Help for a newbie majar Electroplating Questions 2 09-04-2005 02:31 AM
newbie Q's... kmitchel Powder Coating Questions 4 08-02-2005 06:24 AM
newbie ? craigcraig Powder Coating Questions 3 07-04-2004 05:51 PM
newbie here richr Metal Polishing Questions 1 03-20-2004 06:26 PM
NEWBIE pro 100 Metal Polishing Questions 2 12-18-2002 01:44 PM


All times are GMT -4. The time now is 02:01 AM.

Contact Us - Caswell Inc. - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.