|
|
|||||||
| Notices |
| Oven Building Forum Building A Curing Oven? - Here's the place to post your questions, specs and ideas. |
 |
|
|
Thread Tools | Display Modes |
12-21-2005, 07:59 PM
|
|||
|
|||
Element placement for a vertical oven?
Ok im looking to build my own oven, I need an upright oven due to space issues The horizontal oven would take up more space then I can spare. So my question is where to place the elements? Im looking to have a 60x36x36 oven and i want it to be an upright. Thanks for the help in advance.
JHF 
|
|
12-23-2005, 02:35 PM
|
|||
|
|||
|
Re: Element placement for a vertical oven?
I'm planning something very similar. I will use 4 elements, 2 upper & 2 lower. I will put a divider in between so I can use only 1 oven if needed for smaller parts / batches. I'm going to put 1 element on each side of the bix & the temp probe centered on the back panel if at all possible.
|
|
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Oven dimensions and element placement | IanS | Oven Building Forum | 10 | 11-06-2005 01:38 AM |
| Anode placement? | phunkmastakrez | Electroplating Questions | 2 | 09-30-2005 02:17 AM |
| Precision Wire Placement with a CDW | Fibergeek | Anodizing Questions | 4 | 11-25-2004 10:07 PM |
| oven broiler element ? | buzzurd | Powder Coating Questions | 2 | 07-24-2004 10:43 PM |
| Custom oven material and heating element help needed | DarinReiss | Oven Building Forum | 13 | 12-27-2003 09:24 PM |
Linear Mode
