Wiring help now???

[Evolved]

Hello once again guys ok now for the wiring I have the 60 am 240 contactor I know the red and black are for L1 and L2 the ground well of course ground on the oven now the neutral where did you all put that L3,A1,A2 As for the wiring of the elements do I have to run them to receptacle's or can I just run them straight thru the contactor and where did you all ground the elements? Any pics, thoughts, or schematics would be appreciated my email is eclipsed@stx.rr.com tkz for your help again guys.

[Evolved]

Ok did a lil more research and correct me if I am wrong but the neutral will go to a1 on the contactor, the out #8 screw on the temperature controller will go to a2. Now from the schematics that stan sent I have to bridge #7 to #11 on the controller and run #11 and #12 to L1 and L2 correct heopfully that is and wil just leave me with the wiring of the elements tkz again guys and hope this helps someone else out if they where totally lost like me

[shadowman]

Let me know which way you went and how it all worked out for you.


Ben

[Evolved]

Should hopefully be completely done tommorow wow is this thing a monster A lot bigger than what I though it was gonna be might have to throw 2 more elements in if it doesnt heat fast enough I will keep you posted

[Evolved]

Ok did some quick test runs today and it take about 40-45 min. to reach 400 so I am thinking I might add 2 more elements since I have a more room to play with the 60 amp contactor, but let me ask when you cure do you start timing when you put item in and turn on the oven or when it reaches its tempeture then start clock?

[helstar]

you start counting when the item is at the curing temp.