new oven

[helstar]

Ok this is my setup. Just wanted your guys opinion on my setup.

I just built a oven that is 4ft wide x 3ft deep x 6ft tall.
I have scraped 2 home ovens for the elements and controls. I have made a divider to give me a smaller oven for small parts and not trying to heat the whole even.
I have installed a draft induction high output furnance fan in the back top of the oven and put in 2 vents, one at the divider and one at the very bottom of the oven. With a shut off at the divider so i can control the vents.
I have 4 2500 to2800 watt elements in the top and the same in the bottom.
For the wireing i have one oven controller running the top and one for the bottom.
I have the top elements running off the broiler side and the 2 side elements running off the bake side of the controller. This setup is also the same for the bottom of the oven. My oven is 4 inches thick. Getting ready to fire this up. This is all running off of a 30amp breaker at the moment and no tripping of it yet. im looking for a place to post my pics. anybody know of a place to post them please repsond.

[hog1340]

Hey Helstar
Would love to see pictures. I am goiong to run 4 elements they are Miele elements and are rated at 3200 each. I want to run 2 contactors and 2 thermostats, so I can use 2 30 amp runs.

Please send me some pictures
heavymetalpc@comcast.net

Thanks Ed