Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions > Oven Building Forum
barrier wrap barrier wrap
FlashChatBlogs FAQ Members List Calendar Search Today's Posts Mark Forums Read

Notices

Welcome To The Caswell Inc Forums - The Place To Be For Metal Finishing Enthusiasts!

We notice that you are not currently registered on our site, or are not logged in. Registration is FREE and allows you to post questions on our forums, participate in blogs, post pictures, access Technical Support, place orders for products and much, much more! Why not take a moment and register?

You may not realize, but these forums are owned by Caswell Inc, a world leader in hobby metal finishing supplies. Check out our main web site at http://www.caswellplating.com to see the over 2000 products we sell.

Oven Building Forum Building A Curing Oven? - Here's the place to post your questions, specs and ideas.

Reply
Page 2 of 2 < 1 2
 
Thread Tools Display Modes
  #11 (permalink)  
Old 02-13-2007, 04:59 PM
Newbie
  
Join Date: Jan 2007
Posts: 6
johnsjj2 is on a distinguished road
Default Re: barrier wrap
What is the wrap made of? Im curious how long it will withstand those temps.

Josh
Reply With Quote
  #12 (permalink)  
Old 02-14-2007, 03:36 AM
Newbie
  
Join Date: Feb 2007
Posts: 23
bjmill81 is on a distinguished road
Default Re: barrier wrap
on one side its 99.9% aluminum and the other side is fiberglass. Its only 1/32 thick. Im going to double it up just to be safe and maybe cover it with hardie backer. If its works out in the small oven later down the road im going to build a 6x6x12
Reply With Quote
  #13 (permalink)  
Old 03-09-2007, 11:28 PM
Newbie
  
Join Date: Feb 2007
Posts: 23
bjmill81 is on a distinguished road
Default Re: barrier wrap
I started today. I used three layers of barrier wrap. tomarrow I will caulk the corners and run the electrical
Last edited by bjmill81; 03-09-2007 at 11:41 PM.
Reply With Quote
  #14 (permalink)  
Old 03-09-2007, 11:29 PM
Newbie
  
Join Date: Feb 2007
Posts: 23
bjmill81 is on a distinguished road
Default Re: barrier wrap

Reply With Quote
  #15 (permalink)  
Old 03-09-2007, 11:30 PM
Newbie
  
Join Date: Feb 2007
Posts: 23
bjmill81 is on a distinguished road
Default Re: barrier wrap

Reply With Quote
  #16 (permalink)  
Old 03-09-2007, 11:30 PM
Newbie
  
Join Date: Feb 2007
Posts: 23
bjmill81 is on a distinguished road
Default Re: barrier wrap
Last edited by bjmill81; 03-09-2007 at 11:33 PM.
Reply With Quote
Reply
Page 2 of 2 < 1 2

Bookmarks

« Previous Thread | Next Thread »

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Exhaust wrap coating maksuttt Other Metal Finishing Questions 2 06-01-2006 11:57 AM


All times are GMT -4. The time now is 06:54 AM.

Contact Us - Caswell Inc. - Archive - Privacy Statement - Top

Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright © Caswell Inc.