Pics of my budget oven build.

[BottleFed70]

Finally got a chance to work on the oven some more.

Here's a shot that shows the insulation, some wiring, and some of the 1/4" hardy backer board outside covering.

[BottleFed70]

Here's a pic of the door seal installed. I did a double rope seal because the rope I bought only came in 25' rolls. I'm sure a single seal would have been enough.

[grommit]

hello bottlefed70, do you have any more pics, i have a upright 3 droor filing cabinet in mind to play with...any help would be appreciated.as i have no experience in building a frame i am going to talk to my metal smith for help.
cheers dude.
grommit

[BottleFed70]

Originally Posted by grommit

hello bottlefed70, do you have any more pics, i have a upright 3 droor filing cabinet in mind to play with...any help would be appreciated.as i have no experience in building a frame i am going to talk to my metal smith for help.
cheers dude.
grommit

I have a bunch of pics. Anything you want in particular?

I've never framed with steel studs before and found it to be pretty easy. I found that using sheet metal screws was by far the fastest and easiest way to assemble.

[grommit]

Hello bottlefed70, cheers for your quick reply.since writing askin for more pics,my very good friend at work is going to get me the sheet metal i need,he is a metal smith and gets it cheap via work..oops! naughty naughty! i told him about your filing cabinet idea, so if i show him a series of pics (all during working hours at work of course!) he can then do all the calculations and the metal work etc. then when i am up to doing the other bits and bobs i will read up or ask for advice form you experts.pity i cant find a bigger filing cabinet or up right fridge etc...once complete the oven will be located in one of my workshops at work don't worry i will look after the electric consumption...honest.
many thanks again
grommit.