Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Please Read This First

Notices

Please Read This First Please read these posts which explain the terms and conditions under which you may use these forums.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 11-20-2005, 10:19 PM
pickleboy's Avatar
Metal Finishing Guru
 
Join Date: Feb 2005
Location: belleville michigan
Posts: 635
pickleboy is just really nicepickleboy is just really nicepickleboy is just really nicepickleboy is just really nice
Default Question About Reputation

although this is not a product request it is the only place i know that you guys monitor on a regular basis so here its the question. since the forum upgrade i have been seeing the reputation ratings and was curious as to the rating scale, ie: worst to best. and how does a person gain or lose reputation? it might be nice to know even though it does not have a lot of bearing on my activity i am just the nosey person that has to ask. thanks again guys for the forum.
__________________
when in doubt polish it out/ why replace it when you can refinish it
G2 Polishing and Powdercoating
Reply With Quote
  #2 (permalink)  
Old 11-21-2005, 09:18 AM
mcaswell's Avatar
Caswell Inc Founder
 
Join Date: Nov 2001
Location: Lyons, NY USA
Posts: 2,360
mcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to beholdmcaswell is a splendid one to behold
Default Re: question for caswell guys.

Reputation is gained or lost by other users clicking on the scale icon next to each post and either approving or disapproving of your post.

The scale is:

User is infamous around these parts -9999
User can only hope to improve -50
User has a little shameless behaviour in the past -10
User is an unknown quantity at this point 0
User is on a distinguished road 10
User will become famous soon enough 50
User has a spectacular aura about 150
User is a jewel in the rough 250
User is just really nice 350
User is a glorious beacon of light 450
User is a name known to all 550
User is a splendid one to behold 650
User has much to be proud of 1000
User has a brilliant future 1500
User has a reputation beyond repute 2000
__________________
--
Mike Caswell
Caswell Inc
http://www.caswellplating.com
Need Support? Visit our online support section at http://support.caswellplating.com
Have A Web Site?
Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm
Reply With Quote
  #3 (permalink)  
Old 11-21-2005, 03:27 PM
jimcarry's Avatar
Moderator
 
Join Date: Jul 2004
Location: Arkansas
Posts: 370
jimcarry is on a distinguished road
Send a message via Yahoo to jimcarry
Default Re: question for caswell guys.

So if you like the post or it helps you in some way give the person writing it a pat on the back we all volunteer our services here and we should show each other appreciation for the time we all give here
__________________
Jim Eaton
Reply With Quote
  #4 (permalink)  
Old 02-19-2006, 03:24 PM
Amateur Metal Finisher
 
Join Date: Feb 2006
Posts: 60
dfarning is on a distinguished road
Default Re: Question About Reputation

What is the policy on "spreading the love." The same handful of people have been really helpful this week, yet I have only been able give them kudos once.

Thanks
dfarning
Reply With Quote
  #5 (permalink)  
Old 02-20-2006, 08:45 PM
lcaswell's Avatar
Caswell Inc President
 
Join Date: Jan 2001
Location: Lyons NY USA
Posts: 2,292
Blog Entries: 3
lcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud of
Default Re: Question About Reputation

You should be able to give reputation once per post.
__________________
--
Lance Caswell
Caswell Inc
http://www.caswellplating.com
Need Support? Visit our online support section at http://support.caswellplating.com
Have A Web Site?
Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm
Reply With Quote
  #6 (permalink)  
Old 02-23-2006, 08:19 PM
BigDog's Avatar
Amateur Metal Finisher
 
Join Date: Dec 2004
Posts: 89
BigDog is on a distinguished road
Default Re: Question About Reputation

Quote:
Originally Posted by lcaswell
You should be able to give reputation once per post.
It will not allow you to give the same person even in another thread any more reputation.
__________________
Jeff B.
Instructions for riding a Warrior: 1) sit on bike, 2) start bike and idle till warm, 3) pull in clutch and put in gear, 4) release clutch and rip on the throttle, 5) {VERY IMPORTANT!!} HOLD THE F*** ON!!!, 6) Enjoy!! Side effects may include whiplash, wrinkle free skin, and an evil smile resembling the "Joker".
Reply With Quote
  #7 (permalink)  
Old 02-23-2006, 08:31 PM
lcaswell's Avatar
Caswell Inc President
 
Join Date: Jan 2001
Location: Lyons NY USA
Posts: 2,292
Blog Entries: 3
lcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud oflcaswell has much to be proud of
Default Re: Question About Reputation

I changed some options - try it now.

These are the settings in the system:

Register Date Factor
For every 30 days, users gain 1 point of reputation-altering power.

Post Count Factor
For every 50 posts, users gain 1 point of reputation-altering power.

Reputation Point Factor
For every 20 points of reputation, users gain 1 point of reputation-altering power.

Minimum Post Count
How many posts must a user have before his reputation hits count on others? - 50

Minimum Reputation Count
How much reputation must a user have before his reputation hits count on others? - 5

Daily Reputation Clicks Limit
How many reputation clicks can a user give over each 24 hour period? - 5

Reputation User Spread
How many different users must you give reputation to before you can hit the same person again? - 1
__________________
--
Lance Caswell
Caswell Inc
http://www.caswellplating.com
Need Support? Visit our online support section at http://support.caswellplating.com
Have A Web Site?
Why not join our affiliate program and earn 15% of all sales. Join at http://www.caswellplating.com/affiliate.htm
Reply With Quote
  #8 (permalink)  
Old 02-25-2006, 07:10 AM
fly fly is offline
Amateur Metal Finisher
 
Join Date: Jun 2005
Location: beaumont misssissippi
Posts: 310
fly will become famous soon enoughfly will become famous soon enough
Default Re: Question About Reputation

How do I check my reputation.....
__________________
www.chrome-plater.blogspot.com
Reply With Quote
  #9 (permalink)  
Old 02-25-2006, 09:10 AM
BigDog's Avatar
Amateur Metal Finisher
 
Join Date: Dec 2004
Posts: 89
BigDog is on a distinguished road
Default Re: Question About Reputation

Quote:
Originally Posted by fly
How do I check my reputation.....
Click on "User CP" at the top of the page
__________________
Jeff B.
Instructions for riding a Warrior: 1) sit on bike, 2) start bike and idle till warm, 3) pull in clutch and put in gear, 4) release clutch and rip on the throttle, 5) {VERY IMPORTANT!!} HOLD THE F*** ON!!!, 6) Enjoy!! Side effects may include whiplash, wrinkle free skin, and an evil smile resembling the "Joker".
Reply With Quote
  #10 (permalink)  
Old 03-24-2006, 11:39 PM
pickleboy's Avatar
Metal Finishing Guru
 
Join Date: Feb 2005
Location: belleville michigan
Posts: 635
pickleboy is just really nicepickleboy is just really nicepickleboy is just really nicepickleboy is just really nice
Default Re: Question About Reputation

just wanted to say thanks lance for making the adjustments to this function. some of the regulars on here that were maybe not heavy posters but well deserving are finally coming up in the rep area. i personally feel it ads to the forum. thanks again.
__________________
when in doubt polish it out/ why replace it when you can refinish it
G2 Polishing and Powdercoating
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Buffing speed question berad001 Metal Polishing Questions 3 03-11-2005 09:55 PM
Dumb question on curing. remotestartdepot Powder Coating Questions 1 04-28-2004 08:35 AM
Peak voltage question mudwhump Anodizing Questions 6 01-14-2004 10:53 PM
Brand Newbie Aluminum Polishing Question gdsegel Metal Polishing Questions 1 04-25-2003 08:04 AM
Got a question or 2 Darvil Electroplating Questions 2 05-02-2002 12:10 AM


All times are GMT -4. The time now is 08:27 PM.


Powered by vBulletin® Version 3.7.0
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.