![]() |
|
|||||||
| Notices |
| Powder Coating Questions Discussion Board For powder coating questions. |
![]() |
|
|
Thread Tools | Display Modes |
|
|||
|
Who here does PC as a job kind of or to make some money? If you do then around how much do you make? I am only 16 (turning 17 really soon) and can't find a job and thinking about doing PC and being a dealer for some motocross stuff and wanting to know if trying to make money with this would be a waste of time and what not. I will throw up a good site, etc and try to get this thing going ASAP if I hear good things. I first plan to practice until I can do it really well because I don't wan't to mess peoples products up and have to buy them new ones.
Any comments or oppinions will be very helpful. Thanks in advance. |
|
|||
|
Where do you live? Powder coating can be a good business, but it only takes one mistake to cause problems for an otherwise good business. You might want to consider starting out by doing some things for your friends for a very low price. This way you can develope your skills and have someone pay for you to practice time. As you get better you can begin to charge more and advertise locally to get more business. I'm a dirtbike rider and can tell you that word does travel very fast as people see your work out on the trail and the track. You really do need to be careful about how you conduct your business. Two things to remember are..."you're only as good as your last job" and "One scew up can cancel out a thousand attaboys". I would say the best way to start is to get some old junk parts and work on them first. Then take a few parts off your bike and work on them. When you're confident that you've done a good mix of parts tell your friends that you'll do some things for them for the price of the powder and a few bucks for your head. As they show off their newly powder coated parts they will be doing your advertising for you. Then you can begin to charge a little more for your work. This will also help to develope your skills and also give you some cash to buy a better oven and other equipment. Make sure you continuously read the posts on this site.
|
|
|||
|
Thanks for the advise. There is not lots of people here that I know that ride. None of my friends ride dirt bikes, I am the only one. There are some people around here that I am sure would like stuff done to their rice burners and s 10's and thing's of that sort. I wish there were more people into hot rods and dirt bikes here.
Thanks. |
|
|||
|
An added note to skiddz's post-- Be aware that there are customers who can't be made happy. Even if you paid them to let you coat there part and it was perfect, they will find a reason to complain.
You can make money at anything, if you approach it properly. |
|
||||
|
start small..work with a few people, you will never make big money doing things for friends but it will get the word out if you do a good job and your fair...dont give it away...make what you have invested in doing that part and pref a bit more ..for awhile...and as Dale said . (only in my way of saying it.).theres a group of people out there that are still complaing at being born so nothin ya do is going to make them happy...let it pass and feel the next customer out a bit more..I feel if I am happy with it...your gonna be blown away. you set your standards...and then live up to em..
just my thoughts.. |
|
||||
|
Dale is dead-right. Some people are never happy. The 2 customers I mentioned? They're exactly the people Dale's talking about. Didn't matter what I did, the end result just wasn't good enough for these people. I've spoken with other contractors that have worked for these people and they've said my work was excellent and the people calling the shots are just unreasonable.
One more thing. Don't cut corners to meet a deadline. You're going to run into "gotchas" and there's nothing you can do about it. If you're not going to finish a part when you said you would, pick up the phone and let the customer know. 99% of the time it won't be an issue with them and they'll appreciate you keeping them up to date. |
|
|||
|
Yeah I know what you guy's mean. If I ever get anyone like that then I will deal with it for a while but if they keep comming back and complaining then I will tell them straight up to quit the bitching and go to someone else if they aren't happy. Other than that I don't wan't to have someone like that wanting things done from me and give me that additude, I won't take it. I will let it pass a few times but I won't be able to hold it in and I shouldn't have to.
Thanks for the advise. |
|
|||
|
you can make as much as you want or as little as you want .. to get a good shop started and to keep it open you need to go that extra step to keep them happy and over 16 year's i went way above what the customer want's and there has been many return customer's and never a mad one .. you alway let them leave happy .. i messed up the paint on a car after 900 buck's out of my pocket the guy was happy with the job and came back a few time's ... i got a contract with one of the most pickiest person you want to meet and it was hard at first now he love's the work .. he even sent other's to my shop to get stuff done .. so good luck
|
![]() |
| Bookmarks |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Need some help making RED fish hooks | nitro901 | Other Metal Finishing Questions | 2 | 03-27-2008 03:11 AM |
| making real money polishing? | saiyan7 | Metal Polishing Questions | 22 | 12-24-2007 05:41 PM |
| Making circuit traces on plastic parts. | Riesebosch | Electroplating Questions | 1 | 05-02-2005 03:49 AM |
| WHITE COMPOUND IS MAKING PART DULLER THAN THE BLACK HELP.... | 03BUSABOY | Metal Polishing Questions | 2 | 02-06-2005 01:46 PM |
| Making electroless nickel look more like silver | rlforbes | Other Metal Finishing Questions | 1 | 02-16-2004 02:52 AM |