Help

[lato]

I am a novice at powder coating. I just bought a small powder coating system from Caswell. Also I bought black polyester powder. I sandblasted my first few pieces and coated them. Cured for 20 Min at 375 degrees. Pulled them out and let cool. Coating does not seem tough--they scratch easily. Am I doing something wrong? Do I need to use different type of powder? Is there some product for filling in rust pits on older material?
Thanks
Jamey

[Popeye]

Lato,
Sounds like the powder is under cured. You want the BMT base metal temp at 375 before you start timing.
Caswell has Lab-Metal, works great for filling defects.
IMHO

[DALE]

Is it scratching through the coating or just marring the finish?

[lato]

it is scratching all the way through to the metal, thanks jamey

[lato]

it is scratching all the way through to the metal, thanks jamey

[WAORacing]

Then the part is under cured. Try setting the oven on 400 and cure for 30 min. The best and safest way is to use a infared temp gun for getting accurate temps on the part.

[jagboy69]

What is this Lab metal stuff Your telling me I can fill my cleaned metal where there are rust pits and get it smooth looking?? No way!!?? that would be awesome.. wHO has used this stuff Please tell :P

[dagobert]

I've got some of it, and have been happy with the results so far. It's not for structural repairs, but for filling pits, I think you'll like it.