online manual - Plating Powder Coating Buffing Anodizing

kchotboat · #1 (**permalink**) 12-20-2004, 11:11 AM

what does the online manual have to offer?

DALE · #2 (**permalink**) 12-20-2004, 01:53 PM

I'm going way out on a limb here and venturing a guess...instructions?

Kidding aside it has some useful guide lines to get you started with good results.Remember though that the things in the manual and here on the forum are suggestions or guides to get you in the ball park.Every oven,booth,prep and operator has different factors that effect the outcome. So-- the manual and forum get you close and then you fine tune your specific process.There are some nice troubleshooting tips to help prevent you from removing your hair one handful at a time.

kchotboat · #3 (**permalink**) 12-20-2004, 02:09 PM

Thanks for the info guess I will spend the 15 bucks.

#4 (**permalink**) 12-21-2004, 12:15 AM

the best way to learn is by doing ... i wasted alot of powder in the first few trys and after a while you will get it right . it is mostly hit or miss.... good luck

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Plating Manual??	chromo	Electroplating Questions	14	11-23-2005 01:41 PM
The Online Manual	sross	Electroplating Questions	1	10-27-2004 10:04 PM
Salt Water Rheostat removed from manual?	rblmorg	Anodizing Questions	1	09-23-2004 06:44 PM
New here, couple of quick ones (yes I read the manual! :-)	Stryder	Metal Polishing Questions	22	12-15-2003 05:59 PM
on-line manual	shine	Metal Polishing Questions	0	10-19-2003 11:24 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)