Dip Tank - Plating Powder Coating Buffing Anodizing

VPC · #1 (**permalink**) 04-03-2005, 09:14 AM

Has anybody set up a dip tank for stripping parts?
I have dipped small PC'd parts over night in a bath of aircraft stripper with great results.But 55 gals. of the stuff would be costly.Any other chemicals more reasonable for this purpose?

VPC · #2 (**permalink**) 04-05-2005, 02:58 PM

Nobody uses a dip tank?
How do you strip your pC'd parts? Steve

kchotboat · #3 (**permalink**) 04-05-2005, 03:52 PM

I have been doing the same thing as you.

trsick · #4 (**permalink**) 04-05-2005, 04:38 PM

I burn it off!
Bob

Sk33t3r · #5 (**permalink**) 04-07-2005, 04:29 PM

JASCO floor stipper from Home Depot works for me, I picked up some DADS stripper from walmart with a plastic spray bottle. So you should be able to get a plastic tote from walmart and put a few gallons in it to soak the parts. Berrymans Chem dip works as well.

paul

VPC · #6 (**permalink**) 04-20-2005, 05:39 AM

That Berymans Chem dip at Avance Auto was about $55 for 5 gals.
How much was the Dads Stripper ?
I'm up in the mountains so a trip to any where takes awhile.
How well did the Dad's stripper work on powder coat?

Sk33t3r · #7 (**permalink**) 04-21-2005, 09:20 PM

Hold on to your wallet when buying DADs stripper, 1 gallon is $17 to $20. 1 quart cost $6.95 at Wally World but it works damn good.

paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
using aluminum as a cathode	scocklin	Anodizing Questions	19	03-31-2007 12:18 AM
Need opinions on my next tank.	jtsuttle	Anodizing Questions	4	03-29-2004 12:32 PM
Other materials in Anodizing tank?	usao	Anodizing Questions	4	03-04-2004 09:07 PM
leaving cathodes in ano tank?	Sid03	Anodizing Questions	1	01-26-2004 02:10 PM
Tank Heating Questions.	meganine	Anodizing Questions	1	08-03-2003 03:20 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)