High temp coatings - Plating Powder Coating Buffing Anodizing

KeithLambert7 · #1 (**permalink**) 04-30-2005, 03:48 AM

Anyone used the Cerakote or Chromex high temp ceramic coatings Caswell sells here, and what were the results?

I realize it requires an HVLP sprayer and not Powder Gun, but it seems to be in the powder section of the website, so I thought I'd post here first.

Thanks

Keith

Relfn · #2 (**permalink**) 04-30-2005, 12:48 PM

Never used them, but it sounds interesting... I too am curious to hear from some people who have used them.

jtagger19 · #3 (**permalink**) 04-30-2005, 04:25 PM

I use chromex a lot , once polish it looks as close to chrome as you can get.
they are not powder coatings they are liquid paints and require to bake at 500 for 1 hour

techlines coatings are also geat
both will stand very high temperatures with out dulling or peeling off
there are pictures of the coatings on the album at the top.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
High Temp Powder??	trsick	Powder Coating Questions	13	10-11-2004 08:25 PM
high temp sheeting	craigcraig	Powder Coating Questions	1	08-09-2004 12:15 AM
High temp silver discoloring	sgunn911	Powder Coating Questions	16	08-04-2004 08:39 AM
any experience w/ high temp on headers	RossL	Powder Coating Questions	2	05-05-2004 08:11 PM
Can I use VHT high Temp with Krylon High temp radiator paint	magnus	Other Metal Finishing Questions	1	05-03-2003 11:20 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)