Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions

Notices

Powder Coating Questions Discussion Board For powder coating questions.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 05-02-2005, 11:15 PM
Newbie
 
Join Date: Mar 2005
Posts: 2
RCLSolutions
Default Finding a place to powder coat

Hello,

I've powder coated in the past with excellent results. I was doing some small powder coating jobs with my buddy. He moved out of state and I no longer have facilities to powder coat.

I live in an apartment building and coating in my apartment is well...not going to happen. I am serious about powder coating. I made good money just off of a couple jobs that i've done.

I have the money to buy the starter kit and some powders/ tape etc. The poblem is ...there's no place to do it.

Does anyone have any ideas on what type of place I should be looking for? I can not afford $1000 a month for a shop.. and it snows in buffalo soo everybody has a full garage of their own stuff.. so renting a garage is out of the question....

I've looked into some information about small buisiness loans..but... I do not qualify for any assistance..

I'm just looking for a little advice... so that I can get my CASWELL supplies and start rolling out some products....

I've done enough powder coating ... I SHOULD SAY PREP WORK...cause thats most of the job..............I've done enough to know that I want this as a career. I'm sick of working for the man.

There should be a forum devoted to the buisiness side of powder coating..... There is a major lack of information on the net about powder coating setups and building your own booths///...

Thank you,
Rob.
Reply With Quote
  #2 (permalink)  
Old 05-03-2005, 05:55 AM
Newbie
 
Join Date: Apr 2005
Posts: 7
overcoat
Default

Hi there,

I too am looking into this, setting up isn't cheap in the UK.

The property I wish to rent (this is a cheap example) is £400 per month with tax's water and electricity rates etc.

Theres also the issue of organising a lease to be drawn up by a solicitor, this has to be done properly otherwise I could get stung with building repairs etc when coming out of the lease (even if the damage wasn't be fault i.e. structural faults with the building).

I have all the neccesary kit to start up and customers but I'm having trouble sorting out somewhere to do the work.

I'm not sure how leasing would affect you in your country but make sure you check it out. The last thing you want is a £20,000 bill on moving propertys or withdrawing from the building lease.

Thnaks,
steven
Reply With Quote
  #3 (permalink)  
Old 05-03-2005, 10:31 AM
Blademan's Avatar
Experienced Metal Finisher
 
Join Date: Mar 2004
Location: Gold Beach, Oregon
Posts: 322
Blademan is on a distinguished road
Default

how bout one of those storage units that have power,
__________________
Pro-Tech Powder Coating
93976 Ocean Way
541-247-8168
protech@harborside.com
Gold Beach,Oregon
Reply With Quote
  #4 (permalink)  
Old 05-04-2005, 09:42 PM
Amateur Metal Finisher
 
Join Date: Feb 2004
Location: Hermitage, PA
Posts: 69
viper56
Send a message via Yahoo to viper56
Default

Rob,

I can't help you with locating a space to work out of, but I do have a web site dedicated to do-it-your-selfer's as far as building booths and ovens. You can find it at: http://www.stivermotorsports.com/

Hope this helps.

Jim
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
powder coating over powder coat? corybarta Powder Coating Questions 6 08-21-2006 08:15 AM
Powder Coat caught on fire! Sleepr_Tech Powder Coating Questions 3 09-10-2004 06:22 AM
Laser printer = Powder Coat Printer? tbloss001 Powder Coating Questions 11 08-30-2004 06:08 PM
Powder Coat Removal 04sp500 Powder Coating Questions 4 09-19-2003 05:46 PM
Painting over a powder coat chromo Powder Coating Questions 1 01-29-2003 01:20 AM


All times are GMT -4. The time now is 06:33 PM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.