Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions

Notices

Powder Coating Questions Discussion Board For powder coating questions.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 06-14-2005, 09:54 PM
customandsound
Guest
 
Posts: n/a
Default tape

Well i tryed a few types of tape today. Below is the rating.(no pics my camera in in the car )

1. Green fiber glass tape : Perfect little glue from curing
2. 3m Painters tape : Nightmare stuck like cement on block took 3 hours to remove.
3. white fiber glass cloth.. : Perfect but not cheap

well to remove the cheaper 3m painters tape ( blue ) you need to get a spray bottle and put light cuts in it. then spray it down few sprays. i get it wet and wait a few minutes then spray it again. and it comes right off then a little thinner to clean it up.

Now when you got a big part ( wheel)
Foil or the white fiber glass cloth.

I will get a few pics of this so what i am getting at DON'T try to cut corners it just give you more work and less time showing you perfect part off
Reply With Quote
  #2 (permalink)  
Old 06-16-2005, 08:18 AM
Experienced Metal Finisher
 
Join Date: Apr 2004
Posts: 466
jtagger19 is on a distinguished road
Default

you mean over cured powder
or just masking off areas not to be coated ?
Reply With Quote
  #3 (permalink)  
Old 06-16-2005, 08:52 AM
Blademan's Avatar
Experienced Metal Finisher
 
Join Date: Mar 2004
Location: Gold Beach, Oregon
Posts: 322
Blademan is on a distinguished road
Default

I use the red polyester tape from cfs its good to 425f it comes off nice and easy...there 5 mil cloth has 3 mils of silicone adhesive and its good to 500f and comes off sweet..btw chuck sorry i missed your call..best to get me at the shop...
__________________
Pro-Tech Powder Coating
93976 Ocean Way
541-247-8168
protech@harborside.com
Gold Beach,Oregon
Reply With Quote
  #4 (permalink)  
Old 06-16-2005, 09:41 AM
customandsound
Guest
 
Posts: n/a
Default

i used it to mask off. i will be looking for other tape to test in my travels ..

that is ok. i will call the shop one day this week ..i need to call dale and see how he is doing to .. i have that number in my cell phone i was not sure if it was the house or the shop i wrote the shop number down i am going to put it on speed dail #2 #1 is my tow guys
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
hi temp tape shrinking craigcraig Powder Coating Questions 10 11-27-2004 11:04 PM
high temp tape randygrapes218 Powder Coating Questions 3 07-29-2004 08:57 PM
Tape for Masking johnny933 Powder Coating Questions 2 05-11-2004 03:12 AM
Powder Coating Masking Tape Now Available mcaswell Powder Coating Questions 0 08-21-2003 02:13 PM
Looking for masking tape recomendations. chcarver Metal Polishing Questions 0 03-06-2003 02:51 PM


All times are GMT -4. The time now is 11:34 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0 RC4
Copyright © Caswell Inc.