Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum  

Go Back   Plating Powder Coating Buffing Anodizing - Caswell Inc. Metal Finishing Forum > Powder Coating Questions

Notices

Powder Coating Questions Discussion Board For powder coating questions.

Reply
 
Thread Tools Display Modes
  #1 (permalink)  
Old 06-20-2005, 11:47 PM
myillwillinc's Avatar
Amateur Metal Finisher
 
Join Date: Oct 2004
Location: b'ham ala
Posts: 71
myillwillinc
Default trouble with oven wiring

i have a 3 prong plug and a 30 amp circuit breaker. i'm running the red and black to the ccb and the white to the bus bar, then the the red off the cb goes to one plug on the element and the black goes to the one, this pops the cb everytime. can anyone give some advice on wiring for i am not a electrician...
Reply With Quote
  #2 (permalink)  
Old 06-21-2005, 12:17 AM
Experienced Metal Finisher
 
Join Date: Apr 2004
Posts: 466
jtagger19 is on a distinguished road
Default

it should be a 30 amp CONTACTOR not a circuit breaker
basically it goes like this
ON/off switch to thermostat
thermostat to coil in contator
contator to elemnts

and it works like this
you turn ON the switch
the switch turns ON the thermostat
thermostat turns ON the coil
coil turns ON the contator
contactor turns ON the elements
once the elemnts get to the temp set on the thermostat
the thermostat turns off the coil and the coild shots down the contactor wich turns off the elements.

it's not a cience is just a matter of logic.
Reply With Quote
  #3 (permalink)  
Old 06-21-2005, 02:09 PM
myillwillinc's Avatar
Amateur Metal Finisher
 
Join Date: Oct 2004
Location: b'ham ala
Posts: 71
myillwillinc
Default

thanks, i was listining to a friend on this one and didn't know what to use.,..
Reply With Quote
  #4 (permalink)  
Old 06-21-2005, 05:46 PM
Experienced Metal Finisher
 
Join Date: Jun 2004
Posts: 368
Popeye is an unknown quantity at this point
Default

You have a 220/230 volt element... correct?
A lot of house oven elements are 110/120 volt....
Reply With Quote
Reply

Bookmarks


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cooking up an oven project... dagobert Powder Coating Questions 33 06-09-2008 04:43 PM
Wiring Diagram for oven thexporter Oven Building Forum 1 05-07-2006 12:57 PM
Wiring (GE Appliances) oven upncoming Powder Coating Questions 6 07-18-2004 07:45 PM
Powder coating oven suggestion (wiring) tomg552001 Oven Building Forum 1 04-22-2004 02:02 PM


All times are GMT -4. The time now is 08:30 PM.


Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.2.0
Copyright © Caswell Inc.