Wrinkle Red help - Plating Powder Coating Buffing Anodizing

Crimson · #1 (**permalink**) 12-10-2005, 09:18 AM

I bought some wrinkle red powder and cannot seem to really get the wrinkle I should be out of it. I have tried it 2 times. first time at 400 for 10 min's second time I tried it at 350 for 20 min's both times it came out looking like this. Anyone have any idea's of what I would be doing wrong?

sswee · #2 (**permalink**) 12-10-2005, 09:50 AM

Check this out. It also has an URL in the last post that might help.

wrinkle not wrinkling

Popeye · #3 (**permalink**) 12-10-2005, 11:31 AM

Sounds like you didn't cure long enough.

Crimson · #4 (**permalink**) 12-10-2005, 11:34 AM

so I should cure for more then 20 min's? what temp and time would you suggest?

Popeye · #5 (**permalink**) 12-11-2005, 09:56 AM

Once you know the part is actually to temp..."for sure". That's one of the problems with the smaller ovens, they heat up to quick and the part never see's the temp it needs.

I'd do 400 for 25 mins.
You can see the thicker areas of the part is kind of shinny.
IMHO

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Robin Red Wrinkle	Crimson	Powder Coating Questions	0	11-08-2005 08:56 AM
wrinkle not wrinkling	jtagger19	Powder Coating Questions	6	10-06-2005 08:17 PM
Black Wrinkle	warchild	Powder Coating Questions	4	03-18-2005 07:52 PM
Which HB Fuller Color is Robin Red Wrinkle?	Noob2PC	Powder Coating Questions	2	04-22-2004 08:43 PM
Wrinkle finish	matrob	Powder Coating Questions	7	07-22-2003 09:10 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)