Are you satisfied with your compressor?????

[JeffL]

A question for anyone using a blast cabinet or other tools that require lots of air.What size is your cabinet & how much air does it draw from the compressor?What size compressor are you using to run the cabinet?....horse power,tank size, cfm @ 40, & 90 lbs.?I'm in the market for both a cabinet & compressor.Some input & recomendations would be great.

[coleman5]

i built my cabinet 6/3/3 i use a 20 cfm air nozel in it.
i have 120 gal air tank / 2-60 gal water heater tanks i have an air compresour off a service truck 27 cfm @ 145 lb.
so more than enouf air for my needs.

[machone]

I have an 18x32 blast cabinet, 4hp 26 gallon compressor. could probably use a little bigger, but it gets me by. Runs an impact wrench just fine, too.
mach

[JeffL]

Machone.....what is the cfm rating on your compressor? What brand?

[bzer1]

I have a 28X46X28 blast cabinet. My comperssor is a 60 gallon with an upgraded 18 cfm pump. The original pump was a 10 cfm. The compressor was a Home Depot special that I got on sale the entire setup cost about $550. This setup has no problem keeping up with the demands we put on it. The upgraded pump works great and was very easy to install and the company I bought it from was great with their customer service.