Stripper

[mikekozura]

Stripper…. OK what were you guys thinking. What’s the best stripper for powder coat.

[RNMHRD]

Originally Posted by mikekozura

Stripper…. OK what were you guys thinking. What’s the best stripper for powder coat.

Well , i picked up a empty steel 55-gal drum & started filling it 5-gallons at a time with paint gun cleaner AKA "Naked gun cleaner". The stuff rocks !!! will strip down a powdercoated wheel to bare aluminum in about 20-30 minutes.

One suggestion , use a good mask and good gloves when using it. Very bad for you..lol

I usually used the "aircraft" stripper, works good but the gun claener cut down on my stripping labor time by 75% !!

thanks , TIM

[Banditperformance]

Originally Posted by mikekozura

Stripper…. OK what were you guys thinking.

All I can tell you is it involved a cute girl, and a brass pole

[TurboRoadster]

Originally Posted by RNMHRD

Well , i picked up a empty steel 55-gal drum & started filling it 5-gallons at a time with paint gun cleaner AKA "Naked gun cleaner". The stuff rocks !!! will strip down a powdercoated wheel to bare aluminum in about 20-30 minutes.

One suggestion , use a good mask and good gloves when using it. Very bad for you..lol

I usually used the "aircraft" stripper, works good but the gun claener cut down on my stripping labor time by 75% !!

thanks , TIM

link to said stuff please

[RNMHRD]

Originally Posted by TurboRoadster

link to said stuff please

http://search.cartserver.com/search/...0&keywords=KLE


KLEANSTRIP / Pt#: KLE-ESG14
GUN KLEANER KIT W/BASKET

I Got This one from local paint supply store , but here's a place that has it pretty cheap.

[Popeye]

Mike,
You may want to look at the Citrastrip that was discussed in a thread not to long ago.. suppose to work pretty well and you shouldn't have a problem disposing of the old stuff like you would with a solvent based stripper.

[Harleydad]

Originally Posted by mikekozura

Stripper…. OK what were you guys thinking.

I'll take two

[mikekozura]

Originally Posted by Harleydad

I'll take two

You should’ve been with me Last Night at Jill’s strip joint in Dallas Pike West Virginia WOW it takes me days to get over that sh@t.

OK back to the powder stripper Thanks dudes I’ll check into both of them.

[red04cavy]

Originally Posted by mikekozura

You should’ve been with me Last Night at Jill’s strip joint in Dallas Pike West Virginia WOW it takes me days to get over that sh@t.

OK back to the powder stripper Thanks dudes I’ll check into both of them.

I used to know a chick that worked there actually back when we were still in high school!

Anyway, back to the subject at hand....I was told about this stuff at Home Depot that is affordable and works really well. It's supposedly the only stripper in a spray bottle that they have. I'll work on getting a name for you as I want to get some myself.

[mikekozura]

Originally Posted by red04cavy

I used to know a chick that worked there actually back when we were still in high school!

Anyway, back to the subject at hand....I was told about this stuff at Home Depot that is affordable and works really well. It's supposedly the only stripper in a spray bottle that they have. I'll work on getting a name for you as I want to get some myself.

I remember hearing about that myself if I found it I'll let you know. I just don't have no d@mm time.

Lets go to Jill's !!!!!!!!!!