ceramic question

[starting4fun]

Is anyone using or have used any of the oven cure ceramics on an intake even if your oven will not go up to full cure temp? I know that the oven cure ceramics will fully cure with exhaust heat but an intake will not reach that temp for full cure.

[jtagger19]

if the ceramic is not fully cured it will rust under the coating and peel off in a couple months and if it's chromex it will peel off when polishing.

[starting4fun]

Thanks jtagger19 for the reply so it seems that an intake is pretty much out of the question unless you can fully cure it have you ever partially cured and let an exhaust header fully cure with exhaust heat with good results?