stripping powdercoat.

[djgold4653]

i use aircraft remover it woked but had to scrape it to messy

[nuttyman]

don't ever burn powder off of Al. fyi.

[GCPJohn]

I went to solventkleene.com, but i couldn't find where to buy it. More of an informational site is what i'm looking at...maybe I just missed it?

Does anyone sell the stuff locally? I'm in the Tampa, FL area.

Thanks, John

Edit: And which one should I get? Looks like they all do the same thing.

[JTW37]

I use Solvent Kleene, which I think is a super stripper. But to get it from them you have to be a business. Caswell carries the same thing (Solvent Kleene) It's 59.99 per gal or 239.00 for 5 gal.

I have also used this in a pinch and it works pretty good. That would be Permatex Gasket stripper. Yep, it does a pretty good job. There are others out there, but they all are a bit pricey.

[FigureLLC]

normal blasting is not going to affect welds or the structural integrity of a bicycle, motorcycle, or quad frame. if anything, it might actually help because it will soften stress concentrations (ridges, dimples, etc.) where cracks begin.

if you're removing powder coating, use plastic beads. they work better and they don't eat up your substrate.