Need pot metal plated

[monte]

I would like to have some suggestions as to where I could send a clock bezel from a Schatz ship's clock to be re-plated with brass. It is about 6 inches outside diameter, about 5.25 inches inside diameter and about .75 inch thick. There is a smaller, inside ring, that it closes onto that would have to be plated, maybe. It would depend on the cost. And I have about 3 to 4 to be done, and more in the future.
If it would help, I could post some pics of the project.
Any suggestions would be appreciated.
I am located in Austin, Texas.
Thanks,
Monte Reese

[perfectmetal]

Hi, we are perfect metal polishing located in Nj, we do all kinds of plating, polishing and restoration. Our website is under construction, sorry! we can do the job for you, at a fraction of the price that others will quote you. We guarantee our work for a few months also. If you have any questions feel free to ask them. We do a lot of mail orders, so don't worry about that! we insure everything

perfectmetalpolishing@yahoo.com

[ashcroft01]

Monte,
If you are still following this thread, I am interested in seeing these pieces. Are they indeed made of pot metal or are they pewter or Britannia metal?
Either way, my shop has that capability to re-brass or Silver the pieces that you need done. We specialize in antique restorations and repair.
Feel free to contact me at ashcroft01@cox.net if you need any additional information.
Thanks and best of luck,
Curtis