Fs: Turnkey Powder Coating And Ceramic Coating Business!!!!

[Mcurtis7]

I am selling my turn key operation for powder coating and ceramic coatings. I have received WAY too much work, and cannot keep up. This was a part time business that is turning into a full time business. I have a family, full time job, new baby, and other things going on and cannot continue the business, due to lack of time. Something has to give, so its my business. My loss is your gain. Here is my website www.ppcquality.com. There are pictures available on request and the winner of this auction will receive free training by me!!! I have a little over $7000 invested and I am wanting $4500 for ALL of it and its local pickup only. If you have any questions you can contact me at (816) 322-7721. If I don’t answer just leave me a message, it’s the business line. You can also email me at matt@ppcquality.com or mcurtis10@kc.rr.com Listed below is what the buyer will receive.

1 – 6 foot x 3 foot x 2 foot oven, 3 elements, light fan, unistrut rail system and a digital temp/timer
1 – 6 foot x 3 foot x 2 foot sandblast cabinet with foot pedal, shaker, 4 hole, 3 lights, 2 locks
1 – Chicago Electric powder coating gun
150 pounds of 120 grit Aluminum Oxide
100 pounds of 80 grit Auminum Oxide
50 pounds of skatblast media
1 - ½ gallon of Cermakrome (Ceramic Coatings)
1 - blender
2 – 40 gallon tubs of Iron phosphate pretreatment tanks
1 - 5 gallons of Chromicoat CLR for pretreatment of aluminum
1 - 6 oz of CermaSeal (Ceramic Coatings)
1 – 6 oz of CermaWhite (Ceramic Coatings)
1 – 4 oz of CermaRed (Ceramic Coatings)
2 – Gun holders (Ceramic Coatings)
2 – Jam guns(Ceramic Coatings)
2 – Regulators for Jam guns (Ceramic Coatings)
2 – Inline filters for Jam guns (Ceramic Coatings)
1 – New googles
1 – 3M Mask
2 – New filters for mask
1 – Sifter
1 – 32 oz of surface prep
1 – 32 oz of Black Satin (Ceramic Coatings)
1 – Titration Kit
X – Silicone caps
X – Silicone plugs
X – Misc Silicone plugs and caps
4 ½ - Rolls of Shercon 2 inch high temp tape
6 – Rolls of Shercon ¼ inch high temp tape
3 – Sandblast window peel offs
1 – Infrared LASER Digital Non-Contact Thermometer
1 – Wired probe for Infrared LASER Digital Non-Contact Thermometer
1 – Hardshell case for Infrared LASER Digital Non-Contact Thermometer
3 - Heater Controllers
9 – Ceramic Heaters
X – New Sandblast replacement parts, air jets, gaskets, 3 long tube nozzles
1 – 7 ½ gallons of spraywash cleaner
1 – unistrut rail system
3- Rollers for unistrut rail system
1 – Roll of Heavy Duty plastic
1 – 40 Gallon parts washer
1 – digital timer/temp for oven
1 – 1 gallon of ******** dekote paint stripper
X – 100’s of 2 ½ x 3 ½ sheet metal samples
X- Bunch of powder color chips
X- Bunch of powder metal samples
1 – 4 oz of D-Zolve298 Paint and powder coating stripper
X – Training material: books, cd roms
X – Catalogs
X- Business card contacts
X- Business name
X- New Embroidered Polo Shirt with logo
X- If possible transfer of 800 number on info line
X- Business cards I had
1 – Rubbermaid Spray bottle
1 – Sandblast sifter
1 – Sandblast dust collector
1 – 4 gallons of paint thinner
1 – pair of gloves
1 – pair of oven mitts
X- Steel wool
1 – Table
1 – 1 pound of super high gloss clear virgin powder in plastic container
1 – 1 pound of super mirror red virgin powder in plastic container
1 – 10 pounds of Black Wrinkle virgin powder
1 – 5 pounds of Jet Black gloss virgin powder
1 – 1 pound of Near Chrome powder virgin powder
1 – 1 pound of Reflectra Blue virgin powder
1 – 1 pound of Electric Blue virgin powder
1 – 1 pound of Shocker Yellow virgin powder
1 – 1 pound of Lollypop Blue virgin powder
1 – 5 pounds of Matte Clear virgin powder
8 – extra powder cups for gun
1 – New container of Cerma-Glow polishing paste (Ceramic Coating)



Thank you,

Matt

[corrietami]

Originally Posted by Mcurtis7

I am selling my turn key operation for powder coating and ceramic coatings. I have received WAY too much work, and cannot keep up. This was a part time business that is turning into a full time business. I have a family, full time job, new baby, and other things going on and cannot continue the business, due to lack of time. Something has to give, so its my business. My loss is your gain. Here is my website pocket pc software downloads freeware at ppcquality.com. There are pictures available on request and the winner of this auction will receive free training by me!!! I have a little over $7000 invested and I am wanting $4500 for ALL of it and its local pickup only. If you have any questions you can contact me at (816) 322-7721. If I don’t answer just leave me a message, it’s the business line. You can also email me at matt@ppcquality.com or mcurtis10@kc.rr.com Listed below is what the buyer will receive.

1 – 6 foot x 3 foot x 2 foot oven, 3 elements, light fan, unistrut rail system and a digital temp/timer
1 – 6 foot x 3 foot x 2 foot sandblast cabinet with foot pedal, shaker, 4 hole, 3 lights, 2 locks
1 – Chicago Electric powder coating gun
150 pounds of 120 grit Aluminum Oxide
100 pounds of 80 grit Auminum Oxide
50 pounds of skatblast media
1 - ½ gallon of Cermakrome (Ceramic Coatings)
1 - blender
2 – 40 gallon tubs of Iron phosphate pretreatment tanks
1 - 5 gallons of Chromicoat CLR for pretreatment of aluminum
1 - 6 oz of CermaSeal (Ceramic Coatings)
1 – 6 oz of CermaWhite (Ceramic Coatings)
1 – 4 oz of CermaRed (Ceramic Coatings)
2 – Gun holders (Ceramic Coatings)
2 – Jam guns(Ceramic Coatings)
2 – Regulators for Jam guns (Ceramic Coatings)
2 – Inline filters for Jam guns (Ceramic Coatings)
1 – New googles
1 – 3M Mask
2 – New filters for mask
1 – Sifter
1 – 32 oz of surface prep
1 – 32 oz of Black Satin (Ceramic Coatings)
1 – Titration Kit
X – Silicone caps
X – Silicone plugs
X – Misc Silicone plugs and caps
4 ½ - Rolls of Shercon 2 inch high temp tape
6 – Rolls of Shercon ¼ inch high temp tape
3 – Sandblast window peel offs
1 – Infrared LASER Digital Non-Contact Thermometer
1 – Wired probe for Infrared LASER Digital Non-Contact Thermometer
1 – Hardshell case for Infrared LASER Digital Non-Contact Thermometer
3 - Heater Controllers
9 – Ceramic Heaters
X – New Sandblast replacement parts, air jets, gaskets, 3 long tube nozzles
1 – 7 ½ gallons of spraywash cleaner
1 – unistrut rail system
3- Rollers for unistrut rail system
1 – Roll of Heavy Duty plastic
1 – 40 Gallon parts washer
1 – digital timer/temp for oven
1 – 1 gallon of ******** dekote paint stripper
X – 100’s of 2 ½ x 3 ½ sheet metal samples
X- Bunch of powder color chips
X- Bunch of powder metal samples
1 – 4 oz of D-Zolve298 Paint and powder coating stripper
X – Training material: books, cd roms
X – Catalogs
X- Business card contacts
X- Business name
X- New Embroidered Polo Shirt with logo
X- If possible transfer of 800 number on info line
X- Business cards I had
1 – Rubbermaid Spray bottle
1 – Sandblast sifter
1 – Sandblast dust collector
1 – 4 gallons of paint thinner
1 – pair of gloves
1 – pair of oven mitts
X- Steel wool
1 – Table
1 – 1 pound of super high gloss clear virgin powder in plastic container
1 – 1 pound of super mirror red virgin powder in plastic container
1 – 10 pounds of Black Wrinkle virgin powder
1 – 5 pounds of Jet Black gloss virgin powder
1 – 1 pound of Near Chrome powder virgin powder
1 – 1 pound of Reflectra Blue virgin powder
1 – 1 pound of Electric Blue virgin powder
1 – 1 pound of Shocker Yellow virgin powder
1 – 1 pound of Lollypop Blue virgin powder
1 – 5 pounds of Matte Clear virgin powder
8 – extra powder cups for gun
1 – New container of Cerma-Glow polishing paste (Ceramic Coating)



Thank you,

Matt

Matt: I'm looking at your stuff and I like what I see, I'm just days away from either ordering new or checking yours out, could you send me some pictures of your equipment, also where are you located. My name is Corrie Frankl I live in Lidgerwood ND, and I well soon have my place open. I'm very interested in your equipment Please contact me.

E-Mail corrietami@rrt.net
Cell 701-640-7512
Home Phone 701-538-4506
Thank you very much for your time.
Corrie