PC Oven equipment for sale

[racing1g]

Hey guys I have some powder coating oven equipment for sale. If you are interested just email me at shawngartrell@gmail.com, oh and all prices are negotiable just tell me your number and I will tell you yes or no. The only way I due business is through paypal, it's best for everyones safety. Sooo here is what i have, any questions or if you want pictures just use the email above.

1. 6 - 24" x 48" sheets of 2" thick mineral wool insulation from mcmaster-carr never used still in the package mcmaster sent it to me in.---$50.00 +shipping

2. 1- Fotek 75A 24-380V Solid State Relay BRAND NEW---$20.00 +shipping

3. 2- Watlow Series 999 PID temperature/process controllers. One of the controllers is basicly brand new its was installed on my old oven for about 2 days before I decided to stop powdercoating, and the other controller is still in good shape just has a few scratches and dings and i purchased it as a spare. I also have the installation/tuning manual for these controllers as well. If you look these controllers up you will find that the base model goes for nearly $600 apiece. My loss will be your gain, these are some great oven controls. So here is what i'm asking for them.
3A. The new controller w/ tuning and installation manual $400 obo +shipping.
3B. The used controller without manual $150 +shipping.
3C. I will do a package deal both controllers with the manual for $500 +shipping.

4. Stahlin Fiberglass control box dimesions are 9.73"x7.73"x6.36" and the model number is RJ1008HPL BRAND NEW $25 +shipping

5. K-Type Thermocouple with 16' lead and 5" probe, all stainless braided wire BRAND NEW $10 +shipping

6. A/C equipment cooling fan i purchased for the SSR from McMaster it's a 3.15" square and 1" deep runs off 110v-115v BRAND NEW $20 +shipping


7. 25' of Woven slotted fiberglass seal, it is 1" wide and 1/8" thick, purchased from mcmaster BRAND NEW $5 +shipping

Most of the prices are negotiable, If you are interested in anything or if you want to buy everything as a package deal i'll take $600 +shipping which would put you at least halfway into everything needed to build an oven.
Thanks, Shawn