Announcement

Collapse
No announcement yet.

Plugs

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • mcaswell
    replied
    Re: Plugs

    Yes, you can use plastic plugs. You can also use a lacquer based mask...see the discussion board for new products below.

    Leave a comment:


  • antqoutb
    started a topic Plugs

    Plugs

    I'm about to plate a couple of engine cylinders from an antique outboard. They are cast iron with steel sleeves. The original finish was dull nickle and I hope to duplicate it. I obviously do not want to plate the inside of the cylinders. Can plastic plugs be used? If not, are there easy to remove coatings that I can use?
Working...
X