Announcement

Collapse
No announcement yet.

Anode Holder

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Anode Holder

    Hi everyone.
    Merry Chrismas and Happy New Year to all platers and their families. Simple (hopefully) question: I go through quite a few zinc anodes with my 12 gallon Copy Cad setup, what would be a suitable material to make an anode holder. I just want to slide in a new anode when one is needed. Basically, the setup has to accept a new 4X8 zinc sheet with no drilling, thus ensuring that all of the anode is used. Would stainless be OK if submerged in solution as a conductor only? Thanks.
    Andrew.

  • #2
    Anything on the 'anode' side of the tank MUST be made of anode material, otherwise it will sacrifice itself, just as the anode does. You will then contaminate the solution.
    --
    Mike Caswell
    Caswell Inc
    http://www.caswellplating.com
    Need Support? Visit our online support section at http://support.caswellplating.com

    Comment

    Working...
    X